SICK DBS60E-TBEK01000
SICK DBS60E-TBEK01000 Maximum speed that will not cause mechanical destruction of the encoder. It can affect uptime and signal quality
| SPECIFICATIONS | |
|---|---|
| Pulses per revolution | 1.000 |
| measuring step | ≤ 90° electricity/pulses per revolution |
| measurement deviation | ± 18° / Pulses per revolution |
| Error limits | Deviation in measuring step x 3 |
| Detection degree | ≤ 0,5 ± %5 |
| Communication interface | Incremental |
| Communication interface detail | HTL / Push pull |
| Number of signal channels | 6 channels |
| Start time | < 5 ms 1) |
| Output frequency | + 300 kHz 2) |
| load current | ≤ 30 mA per channel |
| Power consumption | ≤ 1 W (No Load) |
| Connection type | Cable, 8-wire, universal, 1.5 m 1) |
| Supply voltage | 10 … 27 V |
| Reference signal, number | 1 |
| Reference signal, position | 90°, electrical, logical combination with A and B |
| Reverse polarization protection | ✔ |
| Short-circuit resistance of outputs | ✔ |
| MTTFd: Mean time to dangerous failure | 500 years (EN ISO 13849-1) 3) |
| Mechanical application | Through hollow shaft, Pre-compression |
| Shaft diameter | 8 mm |
| Flange type / torque support | Torque support 2-sided, long hole, hole circle 63 mm- 83 mm |
| Weight | + 0,25 kg 1) |
| Shaft material | Stainless steel |
| flange material | Aluminum |
| Body material | Aluminum |
| cable material | PVC |
| Starting torque | + 0,5 Ncm (+20 °C) |
| operating torque | 0,4 Ncm (+20 °C) |
| Permissible static spindle movement | ± 0,3 mm (radyal)± 0.5 mm (straight) 2) |
| Permissible dynamic spindle movement | ± 0,1 mm (radyal)± 0.2 mm (straight) 2) |
| Working speed | 6.000 min⁻¹ 3) |
| Maximum number of revolutions | 9.000 min⁻¹ 4) |
| moment of inertia of the rotor | 50 gcm² |
| Bearing service life | 3,6 x 109 tur |
| Angular acceleration | ≤ 500.000 rad/s² |
Add comment
Comments