PHOENIX PLC-RPT-24DC/21
PHOENIX PLC-RPT-24DC/21 PLC-INTERFACE, consisting of PLC-BPT…/21 basic terminal block with Push-in connection and plug-in miniature relay with power contact.
PLC-INTERFACE, consisting of PLC-BPT…/21 basic terminal block with Push-in connection and plug-in miniature relay with power contact, for mounting on NS 35/7,5 DIN rail, 1 changeover contact, input voltage 24 V DC.
| PHOENIX PLC-RPT-24DC/21 | |
|---|---|
| Item number | 2900299 |
| Packing unit | 10 pc |
| Minimum order quantity | 1 pc |
| Product Key | CK623A |
| Catalog Page | Page 364 (C-5-2019) |
| GTIN | 4046356506991 |
| Weight per Piece (including packing) | 35.2 g |
| Weight per Piece (excluding packing) | 32.466 g |
| Customs tariff number | 85364190 |
| Country of origin | DE |
| Product type | Relay Module |
| Application | Universal |
| Operating mode | 100% operating factor |
| Mechanical service life | 2x 107 cycles |
| Insulation characteristics | |
| Overvoltage category | III |
| Pollution degree | 3 |
| Coil side | |
|---|---|
| Nominal input voltage UN | 24 V DC |
| Input voltage range | 18.5 V DC … 33.6 V DC (20 °C) |
| Typical input current at UN | 9 mA |
| Typical response time | 5 ms |
| Typical release time | 8 ms |
| Protective circuit | Reverse polarity protection; Polarity protection diode |
| Freewheeling diode; Freewheeling diode | |
| Operating voltage display | Yellow LED |
| Switching | |
|---|---|
| Contact type | 1 changeover contact |
| Type of switch contact | Single contact |
| Drive and function | monostable |
| Drive (polarity) | bipolar |
| Type of contact | Power contact |
| Contact material | AgSnO |
| Maximum switching voltage | 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC… or …FBST 500…) |
| Minimum switching voltage | 5 V (100 mA) |
| Limiting continuous current | 6 A |
| Maximum inrush current | 10 A (4 s) |
| Min. switching current | 10 mA (12 V) |
| Interrupting rating (ohmic load) max. | 140 W (at 24 V DC) 20 W (at 48 V DC) 18 W (at 60 V DC) 23 W (at 110 V DC) 40 W (at 220 V DC) 1500 VA (for 250 V AC) |
| Switching capacity | 2 A (at 24 V, DC13) 0.2 A (at 110 V, DC13) 0.1 A (at 220 V, DC13) 3 A (at 24 V, AC15) 3 A (at 120 V, AC15) 3 A (at 230 V, AC15) |
Add comment
Comments