• Connector M8, 4-pole, Latching interlocking
  • Thermoplastic enclosure
  • Long life
  • no mechanical wear
  • 88 mm x 25 mm x 13 mm
  • Concealed mounting possible
  • Insensitive to transverse misalignment
  • Insensitive to soiling


Standards BG-GS-ET-14EN IEC 60947-5-3
Coding level according to EN ISO 14119 Low
Working principle Magnetic drive
Installation conditions (mechanical) quasi-flush
Enclosure material Glass-fibre, reinforced thermoplastic
Gross weight 29 g
Integral system diagnostics, status Yes
Number of normally closed (NC) 2
Number of safety contacts 2
B10D Normally-closed contact (NC) 25,000,000 Operations
Actuating element Magnet
Door hinge Right
Direction of motion Head-on to the active surface
Note (Switching distance Sn) Axial misalignment, a horizontal and vertical misalignment of the safety sensor and the actuator are tolerated. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor remains active within the tolerance range.
Assured switching distance “ON” Sao 7 mm
Assured switching distance “OFF” Sar 17 mm
Termination Connector M8, 4-pole, Latching interlocking
Length of sensor 13 mm
Width of sensor 88 mm
Height of sensor 25 mm
Degree of protection IP67
Ambient temperature, minimum -25 °C
Ambient temperature, maximum +70 °C
Storage and transport temperature, minimum -25 °C
Storage and transport temperature, maximum +70 °C
Resistance to vibrations 10 … 55 Hz, amplitude 1 mm
Restistance to shock 30 g / 11 ms
Switching voltage, maximum 24 VDC
Switching current, maximum 0.01 A
Switching capacity, maximum 0.2 W
Switching frequency, maximum 5 Hz

Add comment


There are no comments yet.
Rating: 0 stars
0 votes